Major gas leak from oil rig

A major gas leak from an oil rig in the North sea has been reported. The gas has not caught fire yet. The rig and surrounding ones were evacuated. The flare on the rig continued to burn but the wind direction was blowing the gas away from the flare. Read/ see the videos in these links:
Link 1
Link 2

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Fatality due to fall through removed grating

Thanks to Senthilkumar for sharing news of a fatal accident due to fall through a removed grating:
"At the filtration section of a Phosphoric Acid Plant plant maintenance personnel were lifting a 3 meter filter cloth through a removed grating at the filtration floor at 12 m height. The filter cloth was being removed every four weeks. To lift the filter cloth, the gratings are removed and fixed back every time after lifting/replacement of the filter cloth. Unfortunately the same operator who was watching the lifting activity stepped in to the open hole (of the removed grating) while talking in a radio. He died because of the fall from from 12 m height to ground level".
Removed gratings are very dangerous. During erection or maintenance stages, ensure you have proper control over them. 

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Confined space and gas detectors

Thanks to S.Selvam for sending news about an incident where the gas detector used for confined space tests was out of calibration.Read about the incident in this link.
 Another article by Concept Controls mentions the following:
'There has never been a consensus among manufacturers regarding how frequently confined space gas detectors need to be calibrated. However, manufacturers do agree that the safest and most conservative approach is to verify the
performance of the instrument by exposing it to known concentration test gas before each day’s use. This functional “bump test” is very simple and takes only a few seconds to accomplish. It is not necessary to make a calibration adjustment unless the readings are found to be inaccurate. The regulatory standards that govern confined space entry
procedures are in agreement with this approach'.
Read the article in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Lessons to learn from safety report of Railways

The Indian railways high powered committee on rail safety has published its report. There are two recommendations in the report which also apply to process safety management in India. I am quoting from the report: "There is no practice of independent safety regulation by an independent agency separate from operations. The Railway Board has the unique distinction of being the rule maker, operator and the regulator, all wrapped into one. Commissioners of Railway Safety though considered to be the safety watchdogs have negligible role at the operational level. Compliance of safety standards set by Railways for themselves are often flouted for operational exigencies. The Committee has recommended a statutory Railway Safety Authority (RSA) and a safety architecture which is powerful enough to have a safety oversight on the operational mode of Indian Railways without detaching safety with the railway operations. The Committee has also recommended measures to strengthen the present Railway Safety Commission to undertake meaningful regulatory inspections" IR suffers from ‘IMPLEMENTATION BUG’. Implementation of accepted recommendations of the previous safety committees has been a major issue. The Committee has recommended an empowered group of officers in Railway Board to pilot the implementation of the recommendations in a time bound manner with full funding. The Committee has also recommended the review of implementation of recommendations by the new statutory outfit of Railway Safety Authority under Government of India. In India, we need to make PSM mandatory and bring an independant investigating authority like the CSB. Also, the recommendations of safety audits need to be followed up. Read the full report in this link.

Capacitor failure incident

An interesting incident of a capacitor failure aboard a ship is reported.
Chemical plants use capacitor banks to improve power factor and there are lessons to learn from this incident.
Read about the incident in this link.

Fire in Chemical Tanker

A fire has been reported in a chemical tanker in Mumbai. It appears that toluene was unloaded and "stripping" operations were on when the fire occurred.
Read about it in this link.
UPDATE: An explosion has occurred in the same vessel reportedly injuring 7 petrsonnel, one critically. Read about it in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Murphy's technology laws

I came across some interesting technology laws from Murphy! The best I liked were:

1. "The degree of technical competence is inversely proportional to the level of management.
2. Logic is a systematic method of coming to the wrong conclusion with confidence.
3. Technology is dominated by those who manage what they do not understand". 

No harm intended to anyone......but it is of relevance to PSM today!!!!

Read many good ones in this link

Modifications and HAZOP's

The Management of change element of PSM requires that a PHA be carried out when carrying out modifications. The problem I see in many companies is the lack of continuity of a PHA team due to resignations and retirements. However many checklists and procedure we write, a good PHA depends on the skills of the team leader. With people moving in and out as the PHA chair, the PHA study suffers. No PHA software can replace the skills of a trained PHA facilitator. Whenever a PHA facilitator is changed, go through your facilities management of organizational change procedures and ensure that the requirements of a PHA facilitator are met.

Update on China pesticide factory explosion

Further to my earlier post on an explosion in a pesticide factory in China, a newspaper report indicates the following:
"The investigation found that a heat transfer oil spill under one of the three chemical reactors inside the factory caused a fire that heated the ammonium nitrate and guanidine nitrate in the reactor. Both compounds are used to make explosives and explode at high temperatures.
This caused one reactor to explode, triggering a second, massively destructive blast in the plant. "The blast revealed severe problems with the production processes at the Keeper Chemical factory," according to the investigation statement.
The factory was poorly equipped, had low safety standards, and most procedures require human labor, according to the statement. Further, the factory altered the raw materials and the heat transfer oil system without assessing the risk. In addition, the workers were unqualified. Most of them, including the head of the workshop, were middle school graduates without education in chemical production. "The workers had low qualifications for dealing with emergencies and did not meet the requirements for chemical factory production," the statement said".

Read the report in this link.

More confined space accidents

"A plumber was attempting to warm a confined space in which he intended to work. He placed his lighted cutting torch in the vaulted area and closed the opening. When he returned to the vault, he noticed that the torch was no longer lit and, after entering the vault, attempted to relight the torch. The torch had used up the available oxygen in the space, causing it to extinguish, and filled the space with acetylene. When the plumber reopened the space, oxygen was again introduced and the ignition caused the acetylene vapors to ignite. The plumber was blown out the opening and burned over 65% of his body. He died about a week later."
Read about this accident and 11 other confined space accidents in this link

Accidents in batch processes

See this link for few accidents connected with static electricity and reactivity in batch processes. There are lessons to learn.

Rupture of a rubber lined vessel

A rubber lined vessel was taken out of service to replace the rubber lining. The vessel was taken to the rubber lining works and it was heated with external propane torches after blanking off all openings. Workers heard a whistling noise and ran way. A few moments later the vessel exploded. Heating the vessel externally caused the vessel to over pressurize and rupture. Read the case study in this link.