CONFIRM CYLINDERS ARE EMPTY BEFORE DISCONNECTING!

On December 3, 2020, at approximately 2:30 p.m., an accidental release of toxic chlorine gas occurred at a facility in Point Comfort, Texas, and seriously injured one employee 

At the time of the incident, four employees were involved in replacing an empty chlorine container with a full 2,000-pound (one-ton) container at the facility’s Ethylene Glycol unit. Chlorine gas was used as a biocide in its cooling water treatment system.
As a employee disconnected the supposedly empty chlorine container from the process equipment, chlorine gas escaped because, unknown to the workers, the container still held 1,250 pounds of chlorine (62.5 % of its original inventory). Because the chlorine container was understood to be empty, the  employee was not wearing respiratory protection. After three failed attempts to stop the release, an emergency responder was able to close the chlorine container’s vapor valve and stop the release after 50 minutes.

The employee who disconnected the chlorine container was life-flighted to the hospital after showing respiratory difficulties from exposure to chlorine. Formosa reported that approximately 10 pounds of chlorine gas were released.

The investigation team recommended installing a scale for each container to address the false indication of an empty ton container of chlorine in the future. Knowing the weight of the chlorine container could help plant workers confirm that a container is empty or alert them that the container is not empty. In addition, the company strengthened its operating procedures to clarify that respiratory protection is needed when changing a chlorine container.

Probable Cause
Based on the company's investigation, the CSB determined that the probable cause of the accidental chlorine release was disconnecting process equipment from the chlorine container while the system was pressurized with chlorine. The lack of instrumentation or other equipment to allow the operators to confirm the amount of chlorine in the container contributed to the incident. Another factor contributing to the incident was the use of chlorine in the cooling water treatment program. Had the company used a safer alternative, such as bleach, this incident could have been prevented.

Source:CSB.gov