Further to the reactor blast incident at a pesticide manufacturing facility in Andhra Pradesh, a Times of India newspaper report indicates the following:
"According to experts, there were no control valve and safety rupture disc in the reactor, which exploded following increased temperature. Sources said that employees were testing 'myclo vutanyl', which is used as a pesticide in the agricultural sector, when the blast occurred. Dimethyl sulfoxide (DMSO) and trizol mixture of 8,000 litres in the reactor was tested by night shift employees and the sample sent to the lab. The lab reportedly was not satisfied with the results and the morning batch employees were testing the compound again. During the process, temperature in the reactor shot up to more than 150 degrees centigrade. The block in-charge noticed it and tried to address the problem but it exploded before he could take any action. The fifth block has about 30 reactors and tanks, sources said. A majority of the workers were on tea break during the incident. "Had all the workers been present at the time of the blast, it could have led to fatalities. Eighteen workers got injured as splinters from glasspanes struck them," a worker said'.
While the root causes of the above incident are under investigation, when operating batch processes, many incidents occur due to lack provision or sizing of adequate pressure relief devices. This occurs many times due to scaling up of pilot plant trials to plant production without adequately assessing all the reaction data and associated hazards. Have a proper management of change process to address these gaps in a robust way. Read the article in this link.
Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"
"According to experts, there were no control valve and safety rupture disc in the reactor, which exploded following increased temperature. Sources said that employees were testing 'myclo vutanyl', which is used as a pesticide in the agricultural sector, when the blast occurred. Dimethyl sulfoxide (DMSO) and trizol mixture of 8,000 litres in the reactor was tested by night shift employees and the sample sent to the lab. The lab reportedly was not satisfied with the results and the morning batch employees were testing the compound again. During the process, temperature in the reactor shot up to more than 150 degrees centigrade. The block in-charge noticed it and tried to address the problem but it exploded before he could take any action. The fifth block has about 30 reactors and tanks, sources said. A majority of the workers were on tea break during the incident. "Had all the workers been present at the time of the blast, it could have led to fatalities. Eighteen workers got injured as splinters from glasspanes struck them," a worker said'.
While the root causes of the above incident are under investigation, when operating batch processes, many incidents occur due to lack provision or sizing of adequate pressure relief devices. This occurs many times due to scaling up of pilot plant trials to plant production without adequately assessing all the reaction data and associated hazards. Have a proper management of change process to address these gaps in a robust way. Read the article in this link.
Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"
No comments:
Post a Comment