April 11, 2020

Theme for the month - Nitrogen related incident

A driver of a small-scale liquid nitrogen delivery service vehicle was making a delivery. He connected his transfer hose to the customer-installed tank, which was situated in a semibasement. After he had started to fill, one of the customer’s employees told him that a cloud of vapour was forming around the tank. The driver stopped the filling operation and returned to the area of the tank to investigate. On reaching the bottom of the stairs, he collapsed, but fortunately he was seen by one of the customer’s staff that managed to put on breathing apparatus, go in and drag the man to safety. The driver fully recovered. Unknown to the driver, the bursting disc of the storage tank had failed prior to the start of his fill and as soon as he started filling, nitrogen escaped in the vicinity of the storage tank. The oxygen deficient atmosphere overcame him when he went down to investigate without wearing his portable oxygen monitor, which would have warned him of the oxygen deficiency. The installation had been condemned and was no longer being used. Not only was the tank situated in a semibasement, but the relief device was also not piped to a safe area.

Source:EIGA

April 7, 2020

Theme for the month - Nitrogen related incident

Welding work with an argon mixture was performed inside a road tanker. During lunchtime the welding torch was left inside the tank, and as the valve was not properly closed, argon escaped. When the welder re-entered the tank, he lost consciousness, but was rescued in time. Equipment that is connected to a gas source, except air, must never be left inside confined spaces during lunch breaks, etc. Merely closing the valves is not a guarantee against an escape of gas. If any work with inert gas is carried out in vessels, etc. take care with adequate ventilation or the use of proper breathing equipment.
Source:EIGA

April 3, 2020

Theme for the month - Nitrogen related incident



A man was overcome on entering a steel tank which had been shut up for several years. The atmosphere inside the tank was no longer capable of supporting life due to removal of oxygen from the air by the rusting of steel. A worker from a contractor company had to carry out welds inside a vessel. The vessel had been under a nitrogen blanket, but was ventilated with air before work started. In order to be on the safe side, the welder was asked to wear a fresh air breathing mask. Unfortunately a fellow worker connected the hose to a nitrogen line and the welder died from asphyxiation.
This accident happened because the nitrogen outlet point was not labelled and had a normal air hose connection.
Source:EIGA

March 21, 2020

Importance of wearing a personal gas detector during confined space entry

Two incidents highlight the importance of personal gas detectors that are worn by the person entering a confined space. Read about the incidents in this link (Source; US Coast guard)
I myself had an escape 25 years ago, from a confined space which had CO in it due to improper blinding, because my personal alarm went off.

March 17, 2020

Accident due to improper LOTOTO

This incident highlights the importance of LOTOTO. You cant mess around. You have only one life. Read the incident in this link
Source: US coast guard

March 13, 2020

March 9, 2020

Engineer dies inside a confined space

An experienced engineer went inside a confined space in a ship. Unfortunately, the latches on the entrance hatch closed by gravity once he was inside and he could not come out. He was found dead later. Read the incident in this link
Source: US coast guard