Leak in breathing air hose causes incident

I read about an incident where a person entered a reactor which was under inert gas. He was wearing supplied air breathing apparatus. The catalyst was pyrophoric in nature. Unfortunately, the breathing air hose leaked when he was inside the reactor and his neck got burnt due to the pyrophoric catalyst dust that had accumulated on his suit.
Whenever you do an entry into a nitrogen filled atmosphere, be very careful and your JSA should take into account all possible eventualities.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Hazards of Gas build up in drums

Many times, drums or barrels are used for storage of chemicals. Be careful about drums. They are potential time bombs if not handled and stored properly. In many places I audit, I see that drums are taken for granted. A safety bulletin mentions the hazards of storing chemicals in drums. The hazards include chemical reactions, decomposition, change in altitude or temperature, exposure of drums to heat. Read the safety bulletin in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Chlorine leak incident

FEMA of US has a good case study of a chlorine leak incident that occured in May 1991. It appears that the chlorine leak was caused by a brine leak that contacted the liquified gas. The mixture created corrosive acid which ate through pipes when product was transferred from the storage tank. Read about the incident and lessons learnt from this link.
 
Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Duty time limitations for flight maintenance engineers

The DGCA ( Director General of Civil Aviation) has drafted duty time limitation for flight maintenance engineers to avoid human error. Much of what is mentioned in the draft holds good for chemical industries also. Read the draft advisory article in this link

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Firefighter dies in tank explosion

An explosion in an acrylic acid tank has killed a firefighter in Japan. A news article mentions the following:

"According to the city's fire department and other sources, a 5.6-meter-high acrylic acid storage tank with a diameter of 4.2 meters exploded at 2:35 p.m. Saturday when the company's fire crew members were spraying water on it. The tank that exploded is one of three contiguous tanks, and is the most southerly of the three. Following the explosion, the blaze apparently spread to the other two units.
Shortly before 1 p.m., a company employee reportedly discovered the temperature inside the tank was rising abnormally, prompting the in-house fire crew to spray water over the unit. However, the temperature did not fall.
At 1:51 p.m. the company called the fire department, saying dangerous chemical reactions could occur. At 2:05 p.m. the first batch of firefighters arrived at the plant. About 30 minutes later, the explosion occurred as they were preparing to spray down the tanks.
At that time, Yamamoto was reportedly trying to connect water-supply hoses for the operation, and was standing near a fire engine about 20 meters west of the tank that blew up.
About 50 to 60 employees and others were at the plant when the tank exploded"

Read the complete article in this link.


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"