Many of you would have heard the "banging" noise that a water hammer produces inside a pipeline. We also do not expect a pipeline to be destroyed by water hammer. But it happens. An article by Gregg Basnight mentions the following:
"Contrary to old operating practices to drain and warm up steam lines, "Cracking Open" valves in lines to bleed condensate under steam pressure is NOT safe and has resulted in numerous reported water hammer fatalities.Before admitting steam to any line, the condensate must be removed. Condensate should be assumed to be in all low points and dead legs until proven otherwise by verification of drain or steam trap position and operation. Pressurized dead legs without functioning traps or periodic manual blowdowns will have condensate present. The affected section of piping should be isolated, depressurized and drained before restoring steam to the system".
Read the full article in this link.
"Contrary to old operating practices to drain and warm up steam lines, "Cracking Open" valves in lines to bleed condensate under steam pressure is NOT safe and has resulted in numerous reported water hammer fatalities.Before admitting steam to any line, the condensate must be removed. Condensate should be assumed to be in all low points and dead legs until proven otherwise by verification of drain or steam trap position and operation. Pressurized dead legs without functioning traps or periodic manual blowdowns will have condensate present. The affected section of piping should be isolated, depressurized and drained before restoring steam to the system".
Read the full article in this link.
No comments:
Post a Comment