Pages

October 10, 2011

Safety features at Kudankulam Nuclear Plant

The Kudankulam nuclear plant has been in the news recently due to the protests by the locals. An article in the Business Standard by the former Chairman and current member of the Atomic energy commission mentions the following additional safety features provided:
"The nuclear power units in Kudankulam belong to the third generation of design evolution; the Fukushima reactors belong to the first generation design. A special feature of the Kudankulam design is the passive cooling system for the nuclear reactor core. The water cooling the reactor transfers its heat to the water in the steam generators. After driving the turbine, steam condenses into water in the condenser and is pumped back to the steam generator. In an abnormal situation, when no power is available to drive these pumps, the hot water in the steam generator flows to an air-cooled heat exchanger located at a height outside the reactor building. Owing to the difference in height, the hot water rises up on its own due to its lower density and cold water flows down to the steam generator. This is called the “thermo siphon effect” and it does not need any pump to move the water. This feature was incorporated in the Kudankulam design at India’s insistence. The Kudankulam reactors are the first to have the passive cooling feature. The Kudankulam design has another important feature” a “core catcher”. In the event of an extreme accident and were the molten nuclear fuel to breach the reactor pressure vessel, it falls on to a matrix containing a large amount of neutron-absorbing substances (such as boron). Once mixed with this material, the nuclear fuel is rendered incapable of starting a nuclear chain reaction. Only the latest design of nuclear power units have this safety back-up system".
Read the complete article in this link.

No comments:

Post a Comment