Explosion in 3 D printing firm

New technologies but old hazards - A 3-D printing company, was cited by OSHA after an explosion and fire , which inflicted third-degree burns to an employee. The company was using combustible metal powders like titanium and aluminium alloys in the 3D printing process. There were no Class D metal fire extinguishers on-site during the explosion and fire.

"Establishments that use metal powders in this new technology need to scrutinize their processes and take steps to prevent and protect their employees from fire and explosion hazards that arise with these materials," said Robert Hooper, OSHA's acting regional administrator.

Read the details in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Short cuts are wrong cuts - death by H2S

I came across a powerful youtube video about an accident involving hydrogen sulphide in 2008 in the Middle East where 3 people died. The accident occurred in a pit which was open to atmosphere but contained hydrogen sulphide in the bottom.The reason was taking shortcuts and not obtaining a permit. There are lessons to be learnt from this video, my thanks to whoever has shared this on you tube , as it can save many many lives. Ensure all your employees see this video......in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Reactive chemical incident due to human error

In 2012, a tragic accident in a pharma plant in Ireland claimed the lives of two employees. Apparently, the cause was due to human error in a batch reactor, when the reactants were charged without charging solvent first. The rapid reaction took place without the solvent in place to absorb the heat. This caused the reactor to explode. A news article mentions that one of the ambulances that took one victim was later found so contaminated with chemicals that it was decommissioned.
When you know that certain reactions can dangerously overheat if the operator forgets a step, proper engineering controls should be implemented.
Read the details of the accident in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

One killed, six injured in NLC steam pipeline burst - The Hindu

One killed, six injured in NLC steam pipeline burst - The Hindu

It appears that the unit in which the accident occurred was over 50 years old and that residual life assessment studies were carried out. Will have to wait for the investigation to understand what happened.



 Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Williams Cos. reeling from four explosions at facilities in less than year - Tulsa World: Business

Williams Cos. reeling from four explosions at facilities in less than year - Tulsa World: Business

The article explains how a series of accidents have occurred at a company which had a good safety record.



Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Accident at nuclear power plant - learn lessons

The accident at the newly commissioned Kudankulam power plant highlights the importance of line breaking permits. It appears that while maintenance crew were at work on the shutdown reactor, hot water at about 70 deg C came out of a valve, injuring the workers. While handing over equipment for maintenance, be careful about pockets of trapped hazardous material. Look for any dead legs, which could store them.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Fatal accident during demolition of tank

When you are demolishing a tank or vessel, take adequate care. Conduct a hazard and risk assessment with the demolishing team to make sure the correct method is used. An incident occurred when a  tank being pulled down by an excavator collapsed on the cab of the excavator. Read about it in this link.
 
Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Fatal accident due to pipe explosion

A good case study on the importance of ensuring proper positive isolation and ensuring the line is gas freed before any hot work is done is given in this link.


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Refinery attack In Algeria - Lessons Learnt

On 16 January 2013, terrorists attacked a convoy of gas refinery workers as they departed the housing area of a Refinery in eastern Algeria. The incident led to a four-day siege resulting in the deaths of 38 hostages.
 Read the article of how the emergency was declared by a security guard, (who later died) in this link

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Big is beautiful

Shell is building the Worlds first FLNG (Floating LNG production facility) called the Prelude. Watch the youtube video of the launch of the structure from the dry docks in this link. 
Worth watching is the mesmerising work of the tugboats as they steer the Prelude into the sea. The facility is planned to go into operation in 2017.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Micro reactors and process safety

Researchers at Fraunhofer (Europe’s largest application-oriented research organization) have demonstrated how mcro reactors can be used to safely produce even explosives. Read the interesting article in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Hydrogen from CO2 and sunlight

An interesting article in the Times of India mentions the experiment of producing hydrogen using carbon dioxide and sunlight. Worth a read in this link.


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"