November 29, 2016

A fatal accident due to non barricading of manways

Plant personnel often take manholes for granted. In a vessel or equipment that has its manway opened. In this refinery accident a person was killed when he entered through a manway that was not barricaded. Read about the incident in this link.


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 24, 2016

Fire in Jamnagar refinery kills 2, injures 8

NDTv  reports that two people have died and eight others injured after a fire broke out at the refinery site of Reliance Industries in Gujarat's Jamnagar. It is reported that the  fire broke out in the fluid catalytic cracking unit (FCCU), which was under maintenance,

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

CSB Investigators Deploying to Fire at ExxonMobil Refinery in Baton Rouge, LA

 CSB Investigators Deploying to Fire at ExxonMobil Refinery in Baton Rouge, LA
Washington DC, November 23, 2016 – A three person investigative team from the U.S. Chemical Safety Board (CSB) is deploying to the scene of an incident that injured six workers – including four critically – on Tuesday, November 22 at the ExxonMobil Refinery in Baton Rouge, Louisiana.
According to initial inquiries, flammable vapors were released during unplanned maintenance around a pump. Although there was no explosion, the release ignited and caused a large fire.
“The CSB has investigated too many incidents at refineries across the country,” said Chairperson Vanessa Sutherland. “As an agency, we continue to be concerned about the safety of oil and gas workers and their surrounding communities. The management of risk is an important part of any high hazard operation.”
ExxonMobil’s Baton Rouge Refinery is one of the country’s 150 refineries covered by the Occupational Safety and Health Administration’s (OSHA) Process Safety Management regulations. Despite some positive initial steps toward improvement in process safety management at the federal level, CSB investigations have emphasized the need for a more comprehensive process safety management system in the U.S. to protect worker safety, public health, and the environment.  In fact, the modernization of process safety management regulations is one of the CSB’s Drivers of Critical Chemical Safety Change, a list of key chemical safety advocacy initiatives.
The CSB is an independent federal agency whose mission is to drive chemical safety change through independent investigations to protect people and the environment.
The agency’s board members are appointed by the President and confirmed by the Senate. CSB investigations look into all aspects of chemical accidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems.
For more information, contact Hillary Cohen (traveling with the team) at 202.446.8094 or via email at public@csb.gov.
 

Courtesy CSB website www.csb.gov

November 23, 2016

November 21, 2016

4 killed, 13 injured in phosgene gas leakage at GNFC plant in Dahej

4 killed, 13 injured in phosgene gas leakage at GNFC plant in Dahej: Mishap takes place late last night when mechanical failure in a chemical reactor at the company's Toluene Di-Isocyanate plant

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 20, 2016

Caustic Vapors Ruined Biggest US Refinery | AIChE

Caustic Vapors Ruined Biggest US Refinery | AIChE

Even though this incident happended some time ago, it is worth a re read!!


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 17, 2016

Operating experience with hypo system in lieu of chlorine

An inherently safer system of using hypo instead of chlorine dosing in cooling water systems is prevalent in many industries. A good presentation on the operating issues with such a system is in this link.

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 11, 2016

November 7, 2016

Emergency evacuation - lessons to be learnt from the aviation industry



 

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Initiative by India Glycols for filling CO2 fire extinguishers

There have been a few incidents where CO2 fire extinguishers have suddenly failed due to corrosion caused by moisture in CO2, leading to the formation of carbonic acid. See the earlier post at http://indiaprocesssafety.blogspot.in/2016/05/internal-corrosion-of-gas-cylinders-and.html

Thanks to Mr M.K.Rao, Executive Director of India Glycols for sharing this news:
India Glycols has started the service of filling CO2 fire extinguishers ensuring quality of the filled cylinders to prevent mositure entry. If you are interested, you may contact their marketing department:
rk.gupta@indiaglycols.com
sandeep.sharma@indiaglycols.com


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 2, 2016

Fire at insecticide factory injures 8

News reports indicate at least eight persons have been injured in a fire at Hndustan Insecticides plant in Kerala. The fire is attributed to carbon disulphide.
Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

Corrosion Induced Explosion of a High-Pressure Fire-Extinguishing Gas Cylinder

Thanks to Mr Satya Subrahmanyam DGM, EHS, Coromandel International Limited, for sending a link to the article Corrosion Induced Explosion of a High-Pressure Fire-Extinguishing Gas Cylinder in the Journal of Failure Analysis and Prevention -October 2014, Volume 14,Issue 5,pp 564–568 by Yong Jiang,Jian-ming Gong,Peng-jie Tang.
 The abstract of the article mentions "The failure of a high-pressure fire-extinguishing cylinder was investigated. Failure was induced by internal surface corrosion and stress corrosion cracking (SCC) due to condensation of carbonic acid. In internal surface, especially the area near the bottom of the exploded cylinder, severe corrosion was characterized by local pits. SCC initiated from these local corrosion pits was observed by metallurgical analysis. Microstructure of the failure cylinder near the internal surface consisted of multiple-banded structure and the banded structure could accelerate local corrosion initiation and propagation. The corrosion products built up on the fracture surface were primarily ferrous carbonate (FeCO3). The determination of moisture in fire-extinguishing gas was also examined."
Be careful of your CO2 extinguishers. Traces of moisture which can get in during refilling can cause the formation of carbonic acid and cause corrosion.


Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"

November 1, 2016

Inadvertent mixing incident causes chlorine cloud

More than 100 people were treated for respiratory problems after an inadvertent mixing of chemicals caused a large gas cloud at a plant in Kansas, USA. The two chemicals involved in the spill were identified as sulfuric acid and sodium hypochlorite, which mixed to create a chlorine cloud.
Are you training personnel on the inadvertent effects of mixing of chemicals?

Contribute to the surviving victims of Bhopal by buying my book "Practical Process Safety Management"